熱濫用試驗箱
Thermal abuse test chamber
一、相關標準測試要求
Test requirements
1.IEC62133-2012
2.UL1642
3.GB31241-2014
二、主要技術參數
Main technical parameters
型號Model |
BE-8103 |
結構Structure |
一體機結構，門采用防爆鎖+防爆鏈One machine structure, the door uses explosion-proof lock + explosion-proof chain |
溫度范圍 Temperature range |
常溫～160℃以內可調節控制?Normal?temperature -160°C adjustable control |
控制精度 Controlling accuracy |
±0.5℃ |
溫度偏差 Temperature deviation |
±2.0℃(空載)?No load |
升溫速率Heating rate |
RT～150℃（線性5℃/min）RT～150°C (linear 5°C/min) |
控制顯示方式 Control display |
PLC觸摸式（7寸）+遠程遙控控制 PLC touch type (7 inch) + remote control |
工作室尺寸 Working chamber size |
W600XD500XH600 mm |
外箱尺寸 External chamber size |
W940XD780XH1620 mm |
內箱材質 Inner chamber material |
SUS304鏡面不銹鋼 SUS304 mirror stainless steel |
外箱材質 External chamber size |
SECC鋼板，精粉體烤漆處理（厚度1.5mm） SECC steel plate, fine powder paint treatment (thickness 1.5mm) |
底部Bottom |
裝有萬向輪With universal wheel |
可視窗口 Observation window |
390 X 360mm(20mm厚鋼化防爆玻璃)加裝不銹鋼網防爆(20mm thick explosion-proof glass) installed stainless steel net explosion-proof |
保溫材質 Insulation material |
進口高密度玻璃巖棉，隔熱性好，最大限度地保證溫度保溫性，防密之迫緊材質為耐高溫硅膠,可長時間承受300度以上的高溫Imported high-density glass wool, good heat insulation, to ensure maximum temperature insulation, tight sealing materials for high temperature resistant silicone, withstanding high temperatures over 300 degrees for a long time |
測試孔 Testing hole |
位于箱體左右兩側各有一個直徑50MM的測試孔配孔蓋There is a test hole with a diameter of 50MM Located on the left and right sides of the chamber |
電源電壓Power supply |
220V 50HZ |
功率Power |
4.0KW |
USB接口 USB interface |
帶USB接口，可將測試數據導出With USB interface,?the?test data?can be?exported |
輔助功能 Accessibility |
防爆泄壓裝置、排煙裝置、防爆照明裝置、電子門鎖系統、安全停止開關Explosion-proof pressure relief device, smoke exhaust device, explosion-proof lighting device, electronic door lock system, safety stop switch |
